Artist's concept of Cassini's Saturn Orbit Insertion |
|
| Operator | NASA / ESA / ASI |
|---|---|
| Mission type | Flyby, orbiter, lander |
| Flyby of | Venus, Moon, Earth, Masursky, Jupiter, Saturn's moons |
| Satellite of | Saturn |
| Orbital insertion date | July 1, 2004 02:48:00 UTC |
| Launch date | October 15, 1997 08:43:00 UTC (14 years, 4 months and 1 day ago) |
| Launch vehicle | Titan IV-B / Centaur |
| Launch site | Space Launch Complex 40 Cape Canaveral Air Force Station |
| Mission duration | In Progress (Solstice) (7 years, 7 months and 15 days elapsed) Venus 1st flyby (completed 1998-04-26) Venus 2nd flyby (completed 1999-06-24) Moon flyby (completed 1999-08-18) Earth flyby (completed 1999-08-18) Masursky flyby (completed 2000-01-23) Jupiter flyby (completed 2000-12-30) Huygens (spacecraft) (completed 2005-01-14) Primary mission (completed 2008-06-3-30) Equinox mission (completed 2010-09-27) Extended Equinox Mission (ongoing, to end 2017) |
| COSPAR ID | 1997-061A |
| Homepage | www.esa.int (ESA) saturn.jpl.nasa.gov (NASA) www.asi.it (ASI) |
| Mass | 2,523 kg (5,560 lb) (unfueled orbiter alone) [1] |
| Power | 3 RTGs[2] (GPHS-RTG) ~880 Watts (in 1997)[2] ~670 Watts (in 2010)[2] 30 Volts DC[2] |
Cassini–Huygens is a joint NASA/ESA/ASI spacecraft mission studying the planet Saturn and its many natural satellites since 2004. Launched in 1997 after nearly two decades of gestation, it includes a Saturn orbiter and an atmospheric probe/lander for the moon Titan, although it has also returned data on a wide variety of other things including the Heliosphere, Jupiter, and relativity tests. The Titan probe, Huygens, entered and landed on Titan in 2005. The current end of mission plan is a 2017 Saturn impact.
The complete Cassini–Huygens space probe was launched on October 15, 1997 by a Titan IVB/Centaur, and after a long interplanetary voyage it entered into orbit around Saturn on July 1, 2004. On December 25, 2004, the Huygens probe was separated from the orbiter at approximately 02:00 UTC. It reached Saturn's moon Titan on January 14, 2005, when it descended into Titan's atmosphere, and downward to the surface, radioing scientific information back to the Earth by telemetry. This was the first landing ever accomplished in the outer Solar System. On April 18, 2008, NASA announced a two-year extension of the funding for ground operations of this mission, at which point it was renamed to Cassini Equinox Mission.[3] This was again extended in February 2010 with the Cassini Solstice Mission continuing until 2017. Cassini is the fourth space probe to visit Saturn and the first to enter orbit.
Sixteen European countries and the United States make up the team responsible for designing, building, flying and collecting data from the Cassini orbiter and Huygens probe. The mission is managed by NASA’s Jet Propulsion Laboratory in the United States, where the orbiter was designed and assembled. Development of the Huygens Titan probe was managed by the European Space Research and Technology Centre, whose prime contractor for the probe was the Alcatel company in France. Equipment and instruments for the probe were supplied from many countries. The Italian Space Agency (ASI) provided the Cassini probe's high-gain radio antenna, and a compact and lightweight radar, which acts in multipurpose as a synthetic aperture radar, a radar altimeter, and a radiometer.
Cassini is powered by 32.7 kg[4] of Plutonium-238 — the heat from the material's radioactive decay is turned into electricity. Huygens was supported by Cassini during cruise, but used chemical batteries when independent.
The spacecraft consists of two main elements: the ASI/NASA Cassini orbiter, named for the Italian-French astronomer Giovanni Domenico Cassini, (also known later as Jean-Dominique Cassini when he became a citizen of France), and the ESA-developed Huygens probe, named for the Dutch astronomer, mathematician and physicist Christiaan Huygens. It was commonly called Saturn Orbiter Titan Probe (SOTP) during gestation, both as a Mariner Mark II mission and generically. Mr. Huygens discovered Titan, and Mr. Cassini discovered a few more of Saturn's moons.
Cassini has seven primary objectives:
The Cassini–Huygens spacecraft was launched on October 15, 1997, from Cape Canaveral Air Force Station's Space Launch Complex 40 using a U.S. Air Force Titan IVB/Centaur rocket. The complete launcher was made up of a two-stage Titan IV booster rocket, two strap-on solid rocket motors, the Centaur upper stage, and a payload enclosure, or fairing.
The total cost of this scientific exploration mission is about US$3.26 billion, including $1.4 billion for pre-launch development, $704 million for mission operations, $54 million for tracking and $422 million for the launch vehicle. The United States contributed $2.6 billion (80%), the ESA $500 million (15%), and the ASI $160 million (5%).
The primary mission for Cassini ended on July 30, 2008. However, given the excellent condition of the orbiter, the mission was extended to the end of June 2010 (Cassini Equinox Mission).[5] This studied the Saturn system in detail during Equinox, which happened in August 2009.[3] On February 3, 2010, NASA announced another extension for Cassini, this one for 6½ years until 2017, the time of Summer Solstice in Saturn's Northern Hemisphere (Cassini Solstice Mission). The extension enables another 155 revolutions around the planet, 54 flybys of Titan and 11 flybys of Enceladus.[6] In 2017, an encounter with Titan will change its orbit in such a way that, at closest approach to Saturn, it will be only 3,000 km above the planet's cloudtops, below the inner edge of the D ring. This sequence of "proximal orbits" will end when another encounter with Titan sends the probe into Saturn's atmosphere.
Cassini–Huygens's origins date to 1982, when the European Science Foundation and the American National Academy of Sciences formed a working group to investigate future cooperative missions. Two European scientists suggested a paired Saturn Orbiter and Titan Probe as a possible joint mission. In 1983, NASA's Solar System Exploration Committee recommended the same Orbiter and Probe pair as a core NASA project. NASA and the European Space Agency (ESA) performed a joint study of the potential mission from 1984 to 1985. ESA continued with its own study in 1986, while the American astronaut Sally Ride, in her influential 1987 report "NASA Leadership and America's Future in Space", also examined and approved of the Cassini mission.
While Ride's report described the Saturn orbiter and probe as a NASA solo mission, in 1988 the Associate Administrator for Space Science and Applications of NASA Len Fisk returned to the idea of a joint NASA and ESA mission. He wrote to his counterpart at the ESA, Roger Bonnet, strongly suggesting that the ESA choose the Cassini mission from the three candidates at hand and promising that NASA would commit to the mission as soon as the ESA did.
At the time, NASA was becoming more sensitive to the strain that had developed between the American and European space programs as a result of European perceptions that NASA had not treated it like an equal during previous collaborations. NASA officials and advisers involved in promoting and planning Cassini–Huygens attempted to correct this trend by stressing their desire to evenly share any scientific and technology benefits resulting from the mission. In part, this newfound spirit of cooperation with Europe was driven by a sense of competition with the Soviet Union, which had begun to cooperate more closely with Europe as the ESA drew further away from NASA.
The collaboration not only improved relations between the two space programs but also helped Cassini–Huygens survive congressional budget cuts in the United States. Cassini–Huygens came under fire politically in both 1992 and 1994, but NASA successfully persuaded the U.S. Congress that it would be unwise to halt the project after the ESA had already poured funds into development because frustration on broken space exploration promises might spill over into other areas of foreign relations. The project proceeded politically smoothly after 1994, although citizens' groups concerned about its potential environmental impact attempted to derail it through protests and lawsuits until and past its 1997 launch.[7][8][9][10][11]
The spacecraft was originally planned to be the second three-axis stabilized, RTG-powered Mariner Mark II, a class of spacecraft developed for missions beyond the orbit of Mars.
Cassini was developed simultaneously with the Comet Rendezvous Asteroid Flyby (CRAF) spacecraft, but various budget cuts and rescopings of the project forced NASA to terminate CRAF development in order to save Cassini. As a result, the Cassini spacecraft became a more specialized design, canceling the implementation of the Mariner Mark II series.
The spacecraft, including the orbiter and the probe, is the largest and most complex interplanetary spacecraft built to date. The orbiter has a mass of 2,150 kg (4,700 lb), the probe 350 kg (770 lb). With the launch vehicle adapter and 3,132 kg (6,900 lb) of propellants at launch, the spacecraft had a mass of about 5,600 kg (12,000 lb). Only the two Phobos spacecraft sent to Mars by the Soviet Union were heavier.
The Cassini spacecraft is more than 6.8 meters (22 ft) high and more than 4 meters (13 ft) wide. The complexity of the spacecraft is necessitated both by its trajectory (flight path) to Saturn, and by the ambitious program of scientific observations once the spacecraft reaches its destination. Cassini has at least 1,630 interconnected electronic components, 22,000 wire connections, and over 14 kilometers (8.7 mi) of cabling. The core control computer CPU was a redundant MIL-STD-1750A control system.
Now that the Cassini probe is orbiting Saturn, it is between 8.2 and 10.2 astronomical units from the Earth. Because of this, it takes between 68 to 84 minutes for radio signals to travel from Earth to the spacecraft, and vice-versa. Thus, ground controllers cannot give "real-time" instructions to the spacecraft, either for day-to-day operations, or in cases of unexpected events. Even if they responded immediately after becoming aware of a problem, nearly three hours will have passed between the occurrence of the problem itself and the reception of the engineers' response by the satellite.
Cassini's instrumentation consists of: a synthetic aperture radar mapper, a charge-coupled device imaging system, a visible/infrared mapping spectrometer, a composite infrared spectrometer, a cosmic dust analyzer, a radio and plasma wave experiment, a plasma spectrometer, an ultraviolet imaging spectrograph, a magnetospheric imaging instrument, a magnetometer and an ion/neutral mass spectrometer. Telemetry from the communications antenna and other special transmitters (an S-band transmitter and a dual-frequency Ka-band system) will also be used to make observations of the atmospheres of Titan and Saturn and to measure the gravity fields of the planet and its satellites.
Because of Saturn's distance from the Sun, solar arrays were not feasible as power sources for this space probe.[20] To generate enough power, such arrays would have been too large and too heavy.[20] Instead, the Cassini orbiter is powered by three radioisotope thermoelectric generators (RTGs), which use heat from the natural decay of about 33 kilograms (72 pounds) of plutonium-238 (in the form of plutonium dioxide) to generate direct current electricity via thermocouples.[20] The RTGs on the Cassini mission have the same design as those used on the New Horizons, Galileo and Ulysses space probes, and they were designed to have very long operational lifetimes.[20] At the end of the nominal 11-year Cassini mission, they will still be able to produce 600 to 700 watts of electrical power.[20] (One of the spare RTGs for the Cassini mission was used to power the New Horizons mission to Pluto and the Kuiper belt, which was designed and launched later on.)
To gain interplanetary momentum while already in flight, the trajectory of the Cassini mission included several gravitational slingshot maneuvers: two fly-by passes of Venus, one more of the Earth, and then one of the planet Jupiter. The terrestrial fly-by was the final instance when the Cassini space probe posed any conceivable danger to human beings. This occurred successfully, with hundreds of miles to spare (the space probe passing 500 km above the Earth[4]), on August 18, 1999. Had there been any malfunction that caused the Cassini space probe to collide with the Earth, NASA's complete environmental impact study estimated that, in the worst case (with an acute angle of entry in which Cassini would gradually burn up), a significant fraction of the 32.7 kg[4] of plutonium-238 inside the RTGs would have been dispersed into the Earth's atmosphere so that up to five billion people (i.e. the entire terrestrial population) could have been exposed, causing up to an estimated 5,000 additional cancer deaths[21] (0.0005 per cent, i.e. a fraction 0.000005, of 1 billion cancer deaths expected anyway from other causes; the product is incorrectly calculated elsewhere[22] as 500,000 deaths), but the odds against that happening were more than 1 million to one.[21]
The Huygens probe, supplied by the European Space Agency (ESA) and named after the 17th century Dutch astronomer who first discovered Titan, Christiaan Huygens, scrutinized the clouds, atmosphere, and surface of Saturn's moon Titan in its descent on January 15, 2005. It was designed to enter and brake in Titan's atmosphere and parachute a fully instrumented robotic laboratory down to the surface.[23]
The probe system consisted of the probe itself which descended to Titan, and the probe support equipment (PSE) which remained attached to the orbiting spacecraft. The PSE includes electronics that track the probe, recover the data gathered during its descent, and process and deliver the data to the orbiter that transmits it to Earth. The core control computer CPU was a redundant MIL-STD-1750A control system.
The data was transmitted by a radio link between Huygens and Cassini provided by Probe Data Relay Subsystem (PDRS). As the probe's mission could not be telecommanded from Earth because of the great distance, it was automatically managed by the Command Data Management Subsystem (CDMS). The PDRS and CDMS were provided by the Italian Space Agency (ASI).
The Cassini space probe performed two gravitational-assist fly-bys of Venus on April 26, 1998, and June 24, 1999. These fly-bys provided the space probe with enough momentum to travel all the way out to the asteroid belt. At that point, the Sun's gravity pulled the space probe back into the inner Solar System, where it made a gravitational-assist fly-by of the Earth.
On August 18, 1999, at 03:28 UTC, the Cassini craft made a gravitational-assist flyby of the Earth. One hour and 20 minutes before closest approach, Cassini made the closest approach to the Earth's Moon at 377,000 kilometers, and it took a series of calibration photos.
On Jan. 23, 2000, the Cassini space probe performed a fly-by of the asteroid 2685 Masursky at around 10:00 UTC. The Cassini craft took photos[24] in the period five to seven hours before the fly-by at a distance of 1.6 million kilometers, and a diameter of 15 to 20 km was estimated for the asteroid.
Cassini made its closest approach to Jupiter on December 30, 2000, and made many scientific measurements. About 26,000 images of Jupiter were taken during the months-long flyby. It produced the most detailed global color portrait of Jupiter yet (see image at right), in which the smallest visible features are approximately 60 km (37 mi) across.[25]
The New Horizons mission to Pluto captured more recent images of Jupiter, with a closest approach on February 28, 2007.
A major finding of the flyby, announced on March 6, 2003, was of Jupiter's atmospheric circulation.[26] Dark "belts" alternate with light "zones" in the atmosphere, and scientists had long considered the zones, with their pale clouds, to be areas of upwelling air, partly because many clouds on Earth form where air is rising. But analysis of Cassini imagery showed that individual storm cells of upwelling bright-white clouds, too small to see from Earth, pop up almost without exception in the dark belts. According to Anthony Del Genio of NASA's Goddard Institute for Space Studies, "the belts must be the areas of net-rising atmospheric motion on Jupiter, [so] the net motion in the zones has to be sinking."
Other atmospheric observations included a swirling dark oval of high atmospheric-haze, about the size of the Great Red Spot, near Jupiter's north pole. Infrared imagery revealed aspects of circulation near the poles, with bands of globe-encircling winds, with adjacent bands moving in opposite directions.
The same announcement also discussed the nature of Jupiter's rings. Light scattering by particles in the rings showed the particles were irregularly shaped (rather than spherical) and likely originate as ejecta from micrometeorite impacts on Jupiter's moons, probably Metis and Adrastea.
On October 10, 2003, the Cassini science team announced the results of tests of Einstein's Theory of General Relativity, which were done by using radio waves that were transmitted from the Cassini space probe.[27]
The radio scientists measured a frequency shift in the radio waves to and from the spacecraft, while those signals traveled close to the Sun. According to the Theory of General Relativity, a massive object like the Sun causes space-time to curve, and a beam of radio waves (or light, or any form of electromagnetic radiation) that passes by the Sun has to travel farther because of the curvature.
The extra distance that the radio waves traveled from the Cassini craft, past the Sun, to the Earth delays their arrival. The amount of this time delay provides a sensitive test of the calculated predictions of Einstein's Relativity Theory.
Although some measurable deviations from the values that are calculated using the General Theory of Relativity are predicted by some unusual cosmological models, none of these deviations were found by this experiment. Previous tests using radio waves that were transmitted by the Viking and Voyager space probes were in agreement with the calculated values from General Relativity to within an accuracy of one part in one thousand. The more refined measurements from the Cassini space probe experiment improved this accuracy to about one part in 51,000, with the measured data firmly supporting Einstein's General Theory of Relativity.
Using images taken by Cassini, three new moons of Saturn were discovered in 2004. They are very small and were given the provisional names S/2004 S 1, S/2004 S 2 and S/2004 S 5 before being named Methone, Pallene and Polydeuces at the beginning of 2005.
On May 1, 2005, a new moon was discovered by Cassini in the Keeler gap. It was given the designation S/2005 S 1 before being named Daphnis. The only other known moon inside Saturn's ring system is Pan.
A fifth new moon was discovered by Cassini on May 30, 2007, and was provisionally labelled S/2007 S 4. It is now known as Anthe.
A press release on February 3, 2009 showed a sixth new moon found by Cassini. The moon is approximately 1/3 of a mile in diameter within the G-ring of the ring system of Saturn, and is now named Aegaeon (formerly S/2008 S 1).[28]
A press release on November 2, 2009 mentions the seventh new moon found by Cassini on July 26, 2009. It is presently labeled S/2009 S 1 and is approximately 300 m (984 ft.) in diameter in the B-ring system.[29]
On June 11, 2004, Cassini flew by the moon Phoebe. This was the first opportunity for close-up studies of this moon since the Voyager 2 flyby. It also was Cassini's only possible flyby for Phoebe due to the mechanics of the available orbits around Saturn.[30]
First close-up images were received on June 12, 2004, and mission scientists immediately realized that the surface of Phoebe looks different from asteroids visited by spacecraft. Parts of the heavily cratered surfaces look very bright in those pictures, and it is currently believed that a large amount of water ice exists under its immediate surface.
In an announcement on June 28, 2004, Cassini program scientists described the measurement of the rotational period of Saturn.[31] Since there are no fixed features on the surface that can be used to obtain this period, the repetition of radio emissions was used. These new data agree with the latest values measured from Earth, and constitute a puzzle to the scientists. It turns out that the radio rotational period has changed since it was first measured in 1980 by Voyager, and that it is now 6 minutes longer. This does not indicate a change in the overall spin of the planet, but is thought to be due to movement of the source of the radio emissions to a different latitude, at which the rotation rate is different.
On July 1, 2004, the spacecraft flew through the gap between the F and G rings and achieved orbit, after a seven year voyage.[32] It is the first spacecraft to ever orbit Saturn.
The Saturn Orbital Insertion (SOI) maneuver performed by Cassini was complex, requiring the craft to orient its High-Gain Antenna away from Earth and along its flight path, to shield its instruments from particles in Saturn's rings. Once the craft crossed the ring plane, it had to rotate again to point its engine along its flight path, and then the engine fired to decelerate the craft by 622 meters per second[33] to allow Saturn to capture it. Cassini was captured by Saturn's gravity at around 8:54 p.m. Pacific Daylight Time on June 30, 2004. During the maneuver Cassini passed within 20,000 km (12,000 mi) of Saturn's cloud tops.
Although it is in Saturn orbit, departure from the Saturn system was evaluated in 2008 during end of mission planning.[34]
Cassini had its first distant flyby of Saturn's largest moon, Titan, on July 2, 2004, only a day after orbit insertion, when it approached to within 339,000 km (211,000 mi) of Titan and provided the best look at the moon's surface to date. Images taken through special filters (able to see through the moon's global haze) showed south polar clouds thought to be composed of methane and surface features with widely differing brightness. On October 27, 2004, the spacecraft executed the first of the 45 planned close flybys of Titan when it flew a mere 1,200 kilometers above the moon. Almost four gigabits of data were collected and transmitted to Earth, including the first radar images of the moon's haze-enshrouded surface. It revealed the surface of Titan (at least the area covered by radar) to be relatively level, with topography reaching no more than about 50 meters in altitude. The flyby provided a remarkable increase in imaging resolution over previous coverage. Images with up to 100 times better "resolution" were taken and are typical of resolutions planned for subsequent Titan flybys. (Note that "resolution" refers to the clarity and precision of pictures, and that it has nothing to do with the overall size of the pictures in square centimeters, as is very commonly erroneously stated.)
| External images | |
|---|---|
| Raw images from the Huygens probe descent on 14 January 2005 (37 Pages) © ESA/NASA/JPL/U. of Arizona. (ESA hosting) |
|
Cassini released the Huygens probe on December 25, 2004, by means of a spring and spiral rails intended to rotate the probe for greater stability. It entered the atmosphere of Titan on January 14, 2005, and after a two-and-a-half-hour descent landed on solid ground. Although Cassini successfully relayed 350 of the pictures that it received from Huygens of its descent and landing site, a software error failed to turn on one of the Cassini receivers and caused the loss of the other 350 pictures.
During the first two close flybys of the moon Enceladus in 2005, Cassini discovered a "deflection" in the local magnetic field that is characteristic for the existence of a thin but significant atmosphere. Other measurements obtained at that time point to ionized water vapor as being its main constituent. Cassini also observed water ice geysers erupting from the south pole of Enceladus, which gives more credibility to the idea that Enceladus is supplying the particles of Saturn's E ring. Mission scientists hypothesize that there may be pockets of liquid water near the surface of the moon that fuel the eruptions, making Enceladus one of the few bodies in the Solar System to contain liquid water.[35]
On March 12, 2008, Cassini made a close fly-by of Enceladus, getting within 50 km of the moon's surface.[36] The spacecraft passed through the plumes extending from its southern geysers, detecting water, carbon dioxide and various hydrocarbons with its mass spectrometer, while also mapping surface features that are at much higher temperature than their surroundings with the infrared spectrometer.[37] Cassini was unable to collect data with its cosmic dust analyzer due to an unknown software malfunction.
On November 21 Cassini again made a fly by of Enceladus,[38] this time with a very different geometry, approaching within 1,600 kilometers (990 mi) of the surface. The Composit Infrared Spectrograph (CIRS) instrument will make a map of thermal emissions from the tiger stripe Baghdad Sulcus. This is the eighth flyby of Enceladus and is also sometimes referred to as “E-8.” The data and images returned will help to create the most-detailed-yet mosaic image of the southern part of the moon's Saturn-facing hemisphere and a contiguous thermal map of one of the intriguing "tiger stripe" features, with the highest resolution to date.
In May 2005, Cassini began a series of occultation experiments, to measure the size-distribution of particles in Saturn's rings, and measure the atmosphere of Saturn itself. For over 4 months, Cassini completed orbits designed for this purpose. During these experiments, Cassini flew behind the ring plane of Saturn, as seen from Earth, and transmitted radio waves through the particles. The radio signals were received on Earth, where the frequency, phase, and power of the signal was analyzed to help determine the structure of the rings.
In images captured September 5, 2005, Cassini detected spokes in Saturn's rings, previously seen only by the visual observer Stephen James O'Meara in 1977 and then confirmed by the Voyager space probes in the early 1980s.[39]
Radar images obtained on July 21, 2006 appear to show lakes of liquid hydrocarbon (such as methane and ethane) in Titan's northern latitudes. This is the first discovery of currently-existing lakes anywhere besides Earth. The lakes range in size from one to one-hundred kilometers across.[40]
On March 13, 2007, the Jet Propulsion Laboratory announced that it found strong evidence of seas of methane and ethane in the northern hemisphere of Titan. At least one of these is larger than any of the Great Lakes in North America.[41]
In November 2006, scientists discovered a storm at the south pole of Saturn with a distinct eyewall. This is characteristic of a hurricane on Earth and had never been seen on another planet before. Unlike a terran hurricane, the storm appears to be stationary at the pole. The storm is 8,000 kilometers (5,000 mi) across, and 70 kilometres (43 mi) high, with winds blowing at 560 kilometers per hour (350 mph).[42]
On September 10, 2007, Cassini completed its flyby of the strange, two-toned, walnut-shaped moon, Iapetus. Images were taken from 1,000 miles (1,600 km) above the surface. As it was sending the images back to Earth, it was hit by a cosmic ray which forced it to temporarily enter safe mode. All of the data from the flyby was recovered.[43]
On April 15, 2008, Cassini received funding for a two-year extended mission. It consisted of 60 more orbits of Saturn, with 21 more close Titan flybys, seven of Enceladus, six of Mimas, eight of Tethys, and one targeted flyby each of Dione, Rhea, and Helene.[44] The extended mission began on July 1, 2008, and was renamed the Cassini Equinox Mission as the mission coincided with Saturn's equinox.[45]
A proposal was submitted to NASA for a second mission extension, provisionally named the extended-extended mission or XXM.[46] This was subsequently approved and renamed the Cassini Solstice Mission.[47] It will see Cassini orbiting Saturn 155 more times, conducting 54 additional flybys of Titan and 11 more of Enceladus. The chosen mission ending is a series of close Saturn passes then a fiery plunge into the Saturn atmosphere, around its 2017 northern summer solstice.[34]
On November 2, 2010, Cassini was triggered into a protective standby mode, or "safe mode", after a bit flip caused it to miss an important instruction. NASA announced the interruption in scientific processes on November 8.[48] However, by November 8 some of the craft's functionality had already been partly restored.[49] Nominal scientific instrument sequencing events were successfully started on November 10.[50][51] Cassini was reactivated as scheduled on November 24 and has returned to perfect working order, in time for two scheduled close fly-bys with Enceladus.[52] At this point there has been no public disclosure[53] as to the data loss impact of the November 11 (T-73) flyby. However, no images were acquired at the 11 November polar flyby.
| Colour | Meaning[34] |
|---|---|
| Red | Poor |
| Yellow | Fair |
| Light Green | Good |
| Green | Excellent |
During planning for its extended missions, various future plans for Cassini were evaluated especially on the basis of science return, cost, and time.[34] Some of the options examined include collision with Saturn atmosphere, icy satellite, or rings; another is departure from Saturn orbit to Jupiter, Uranus, Neptune, or a Centaur.[34] Other options include leaving it in certain stable orbits around Saturn, or departure to a heliocentric orbit.[34] Each plan requires certain amounts of time and changes in velocity.[34] Another possibility was aerobraking into orbit around Titan.[54]
This table is based on page 19 of Cassini Extend Missions (NASA), from 2008.[34]
| Option | Set Up Requirements | Execution Time | Operability +
Assurance of EOL |
Velocity change (Delta-V)
required |
Science Evaluation circa 2008 |
|---|---|---|---|---|---|
| Saturn Impact – Short Period Orbits | High inclination achievable via any XXM design | 2–10 months total | Short time between last encounter and impact | 5–30 m/s | D-ring option satisfies unachieved AO goals; cheap and easily achievable |
| Saturn Impact – Long Period Orbits | Specific orientation and inclination required | 4–22 months to set up long period orbit + 3 years for final orbit | 3 years between last encounter and impact | 5–35 m/s | Operations costs required for 3 years with no science could be applied elsewhere |
| Impact Icy Satellite | Can be implemented from any geometry | 0.5–3 months total | Short time between last encounter and impact | 5–15 m/s | Cheap and achievable anywhere/time |
| Impact Main Rings | Can be implemented from any geometry | 0.5–3 months total | Short time between last encounter and impact but difficult to prove spacecraft destruction | 5–15 m/s | Cheap and achievable anywhere/time; close-in science before impact |
| Escape to Gas Giant | Specific orbit period, orientation and inclination required + specific departure dates | 1.4-2.4 years to escape + long transfer time (Jupiter 12 years, Uranus 20 years, Neptune 40 years) | Planetary impact can only be guaranteed shortly after escape for Jupiter | 5–35 m/s | Gas giant science unlikely |
| Escape to Heliocentric orbit | Can be implemented from any geometry | 9–18 months to escape, open-ended Solar orbit | Last encounter goes to escape | 5–30 m/s | Solar wind data only |
| Escape to Centaur | Large target set offers wide range of departures | 1–2 years to escape + 3+ year transfer | Last encounter goes to escape; must maintain teams for 3+ years for Centaur science | 5–30 m/s | Multi-year lifetime and funding seems better spent in target-rich Saturnian environment |
| Stable Orbit Outside Titan | Specific orientation and orbit period required | 13–24 months + open-ended time in stable orbit | 200 days between last encounter and final orbit | 50 m/s | Limited Saturn / magnetospheric science, but for long period of time |
| Stable Orbit Outside Phoebe | Specific orientation and orbit period required | 8+ years + open-ended time in stable orbit | Many months between last encounter and final
orbit |
120 m/s | Solar wind data; very
rare passages through magnetotail |
The choice was XXM (Cassini Solstice Mission), starting in 2010, several years of flybys culminating in proximal orbits and Saturn impact in 2017.[55] See Planetary Science Decadal Survey for other Solar System mission concepts.
The initial gravitational-assist trajectory of Cassini–Huygens is the process whereby an insignificant mass approaches a significant mass "from behind" and "steals" some of its orbital momentum. The significant mass, usually a planet, loses a very small proportion of its orbital momentum to the insignificant mass, the space probe in this case. However, due to the space probe's small mass, this momentum transfer gives it a relatively large velocity increase in proportion to its initial velocity, speeding up its travel through outer space.
The Cassini–Huygens space probe performed two gravitational assist fly-bys at Venus, one more fly-by at the Earth, and a final fly-by at Jupiter.
Official websites
Telecommunications & imaging
Scientific press coverage
Other
|
|||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
|||||||||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||
|
||||||||